Name: Diamond drill machine, 600 mm
Brand: boels
SKU: 10500
Availability: inStock

New

Code: 10500

A versatile high-frequency, high-power electric drill motor. The machine runs at the optimum power, revolutions and sawing pressure. This machine is suitable for drill bits in the range from 100 - 600 mm. This machine can be used with both a single-phase and three-phase power supply.The corresponding power unit (10996) rented separately with the drill can also be used with other high-frequency machines such as the ring saw (10976). To anchor the stand, please rent a drop-in anchor set or a vacuum pump as an addition to the drill system. We have a wide range of diamond drills available for drilling into materials such as brick, cinder blocks, sand-lime brick, (reinforced) concrete and asphalt. Concrete slurry and water are extracted using a slurry collector. This keeps the environment clean during drilling activities and less cleaning is required after drilling. You can rent or purchase the diamond drill. If you rent a diamond drill, please return it together with the machine. The price of the drill is calculated as follows: * Measurement upon collection and return. * Depending on the diameter and type of drill, a unit price per 0.1 mm is charged, with a minimum of 0.25 mm. * The maximum wear price per drill is equal to the selling price.

Price Price on application

This product includes 2 mandatory accessories . These will be added to your booking automatically.

This product can only be hired by businesses with a customer number.

Details
Drill stand required
Drilling diameter on a stand max. (mm)	600
Drilling diameter hand-held max. (mm)	80
Weight (kg)	14
Power 1-phase 230V (W)	3000
Voltage (V)	230/400
Noise level (dB)	112
Power 3-phase 400V (W)	6000

Key Features

extremely efficient in reinforced concrete brick and other building materials
this machine may only be used with a tripod
the machine is protected against overloading and has a starting torque
attach stand using on drop-in anchor or vacuum suction with a vacuum pump
can be combined with a slurry collector and slurry, sludge and liquid vacuum cleaner for cleaner work when drilling in walls and floors
expert instruction, support and advice provided by our concrete specialists

All prices excl. 27% VAT and exclude costs for maintenance, fuel, oil, wear and tear, transport, cleaning, accessories and various attachments, any environmental taxes and surcharges for damage waiver and fire/theft schemes.

Daily rates are based on hire/use of maximum 24 hours, and the weekly rates on hire/use of maximum 168 hours, excluding machines with an hour counter; in such cases the daily rate is based on 8 operating hours and the weekly rate based on 40 operating hours. An surcharge applies for additional operating hours.

The weekend rate (Friday to Monday) is based on hire/use of maximum 72 hours (Sunday is not calculated in the price).

Mandatory accessories

These will be added to your booking automatically.

Code 10996

This power unit is the power source for high-frequency machines such as the ring saw (10976) and drill motor (10500). The power pack is air-cooled.

Code 15205

The most efficient drill stand for drilling a number of holes from just one position using various settings. Ideal for drilling holes in a ceiling, for example, for spotlights and lead-throughs under a sloping roof. Clean and dust-free because of the water collection system and wet vacuum.

Optional accessories

These can be selected during the booking process

Code 11136

Pressure vessel that, after being filled, maintains the pressure until the drum is empty, without a battery or power supply. Ideal for diamond drills and cut-off saws.

Code 310592

The wear is measured on pick-up and again on return.
Depending on the diameter and type of drilling bit, a unit price per 0.1 mm applies with a minimum of 0.25 mm. This minimum charge covers part of the logistical costs, the wear, risk of breakage, etc.
The maximum wear charge per drilling bit is equal to the selling price.
If you would like to purchase this wear item, the selling price is € 974.00 each.

Code 310593

The wear is measured on pick-up and again on return.
Depending on the diameter and type of drilling bit, a unit price per 0.1 mm applies with a minimum of 0.25 mm. This minimum charge covers part of the logistical costs, the wear, risk of breakage, etc.
The maximum wear charge per drilling bit is equal to the selling price.
If you would like to purchase this wear item, the selling price is € 982.00 each.

Code 310594

The wear is measured on pick-up and again on return.
Depending on the diameter and type of drilling bit, a unit price per 0.1 mm applies with a minimum of 0.25 mm. This minimum charge covers part of the logistical costs, the wear, risk of breakage, etc.
The maximum wear charge per drilling bit is equal to the selling price.
If you would like to purchase this wear item, the selling price is € 1194.00 each.

Code 310595

The wear is measured on pick-up and again on return.
Depending on the diameter and type of drilling bit, a unit price per 0.1 mm applies with a minimum of 0.25 mm. This minimum charge covers part of the logistical costs, the wear, risk of breakage, etc.
The maximum wear charge per drilling bit is equal to the selling price.
If you would like to purchase this wear item, the selling price is € 1392.00 each.

Code 341609

Code 341731

Code 305081

Code 300998

Code 331001

Code 342740

Code 310590

The wear is measured on pick-up and again on return.
Depending on the diameter and type of drilling bit, a unit price per 0.1 mm applies with a minimum of 0.25 mm. This minimum charge covers part of the logistical costs, the wear, risk of breakage, etc.
The maximum wear charge per drilling bit is equal to the selling price.
If you would like to purchase this wear item, the selling price is € 790.00 each.

Diamond drill machine, 600 mm

Details

Key Features

Mandatory accessories

Optional accessories